Automotive relay high quality 12V 40A 4pins 5pins for cars
F2 Specification:
| Contact Form | Form 1A 1B 1C |
| Contact material | Ag Alloy |
| Contact Load | 40A 14VDC |
| Electrical life | 100,000 ops |
| Mechanical Life | 1,000,000 ops |
| Initial insulation resistance | 500MΩ |
| Dielectric strength | 500VAC |
| Unit Weight | 34g |
| Min. contact load | 1A 6VDC |
| Construction | Plastic sealed, Dust protectedWeather-proof cover |
| CROSS REFERENCE | TYCO OMRON:G8QN |
1)For NO contacts, measured when applying 100% rated votage on coil.For NC contacts,measured when applying zero voltage on coil.
2)lnrush peak current under lamp load, at 13.5VDC.
3) 1min, leakage current less than 1mA.
4)The value is measured when voltage drops suddenly from nominalvoltage to 0 VDC and coil is not paralleled with suppression circuit.
5) When energized, opening time of NO contacts shall not exceed 1ms,when non-energized, opening time of NC contacts shall not exceed1ms, meantime, NO contacts shall not be closed.
6) FMVSS: Federal Motor Vehicle Safety Standard.
7) Do NOT knock on relays with hard objects such as rubber rod andrubber hammer during mounting, which might lead to relay damage.
8)Only valid for QC version.
9) Test point is at 2mm away from teminal end, and after removing testingforce, the terminal transfiguration shall not exceed 0.5mm.
F3 Relay Photo:
F4 Drawing:
F5 Applications:
Used for Fog lamp & headlight control
Rear window defogger,
Air-conditioning,
Fuel pump control,
Battery Operated,
Windshield Wiper
Cooling fan control,
Battery disconnection device
F6 Certificates:
IATF/16949 certificate(IATF 16949:2016 (replaces ISO/TS 16949:2009) is a standard that establishes the requirements for a Quality Management System (QMS), specifically for the automotive sector. The ISO/TS 16949 was originally created in 1999 to harmonize different assessment and certification schemes worldwide in the supply chain for the automotive sector.
The primary focus of the IATF 16949 standard is the development of a Quality Management System that provides for continual improvement, emphasizing defect prevention and the reduction of variation and waste in the supply chain. The standard, combined with applicable Customer-Specific Requirements (CSR’s), define the QMS requirements for automotive production, service and/or accessory parts.)
F7 Incoming Inspection:
Environmental Testing Chamber
X-ray Machine
Oscilloscope
Date Acquisition Instrument
Electrical Life Testing System
Mechanical Life Testing Platform
High Speed Camera
F8 Equipment:
Automated Workshop
Advanced Automatic Assembly Line
F9 About Us:
BUYCON is a professional supplier in connectors, terminals, seals and relays;
Experience of over 20 years within the component industry;
Our customers come from all over the world
F10 Transportation:
EXPRESS: DHL & FEDEX & UPS & TNT
SEASHIPMENT: NINGBO & SHANGHAI & SHENZHEN
TRAIN: XI’AN & CHENGDU & SHANGHAI & SHENZHEN & BEIJING
